![]() It might just make more sense to have a reputable and professional repair place do this for you. I have no idea what type of adhesive Apple products use but I am sure it would cost a lot and you probably will need a vacuum type screen seperator machine. Samsung, many iPhones and few other brands do have the touchscreen adhered directly to the LCD.įor Samsung phones you have to use a UV activated liquid adhesive but it must dry crystal clear and you do need to purchase a UV light to activate the glue. ![]() Most replacement touchscreens have this already cut to size/shape and applied but some do not and must be purchased separately. The glass touchscreen on majority of phones/tablets do not come in direct contact with the actual LCD, it is connected via ribbon connector. This is the only option and is available in many sizes. = 3M Adhesive Tape from a Phone Parts/Repair Supplier= And if that is the case, then any "re-bonding" repair obviously isn't going to last very long. But the thing you should be asking yourself is WHY the glass is separating.Īs I have encountered some plastic bodied phones such as the iPhone 5C where the outer glass began to mysteriously pull apart from the plastic bezel b/c the chassis it was mounted to became distorted slightly somehow (repeated back pocket squash?) And, given it sounds like your phone has suffered several intense drops/shocks over its lifetime, it could be that the thing the glass is supposed to be attached to is no longer flat. Sometimes the "glass" is inserted and glued inside a plastic frame with some 3M type adhesive. On some Motorola Droid models, the LCD-Digitizer/Glass is a unit construction. I'm not sure exactly what Droid you have as here are many, but often it is not possible (or just very difficult) to separate/re-bond the digitizer or outer glass without destroying something.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |